Mirror Clamp Cover CNC-Racing

• Material: Aluminium.
• Color options: Anodized (Red / Black) 
• CNC-Racing Laser engraving.
• Price per piece.
• Made in Italy

CNC racing mirror clamp cover. This is needed to cover the ugly thread of the mirror clamp after disassembly.
The screw is available in M10x1.25 left- or right-hand thread or as M8x1.25 screw with left- or right-hand thread!

Important note: for M10 threads, screws with fine thread M10x1.25 or screws with standard thread M10x1.5 are used, depending on the manufacturer.

Mirror clamps from the aftermarket often have standard threads. Even if the original M10x1.25 was installed, this may no longer be correct for a replaced mirror clip! It is therefore important that you check the required thread and order accordingly! As a rule of thumb, if a normal M10 bolt fits, it is an M10x1.5.

List of known thread types:

KTM 1290 Superduke                                M10x1.25      Rechts/Rechts Gewinde
Ducati M696-1100evo/821-1200               M8                  Rechts/Links Gewinde
Ducati SF848-1098-1098S                        M8                  Rechts/Links Gewinde