Desmoworld Clutch Cover Spacer Disc EVO-II

as an alternative to our single spacers, we also manufacture this one-piece version milled from solid aluminum.

The spacer disc replaces the original rubber seal behind the clutch cover of the dry clutch.

If necessary, it can also be installed together with the seal.
In this case, the clutch cover is moved outward by 5mm. Helpful for various clutch covers which come
very after the spring plates come. In the event of a fall, just these 5mm could decide whether the depressed
open aluminum cover the springs off or not.

Another possible application is the Desmoworld Spacer Disc in combination with half clutch covers. With such
often the edge of the motor housing remains visible (see example picture). However, the edges often look unattractive, due to the previously
the previously mounted rubber gasket. With the spacer you can easily solve this problem in a visually appealing way.

Or you use our disc simply to set another color accent, of course, only for the dry clutches on the older models
like Monster 900, S4R, Supersport, 748-916-996-998, 1098-1198, 749-999, ST2-ST4 suitably

 

• Desmoworld clutch spacer Disc
• Milled from solid aluminum
• 2 slots on the bottom for the removal of clutch Abrasion
• Spacer available in red, black, silver, gold anodized

Please note: with the combination Disc + rubber seal 5mm longer screws are needed. If you only build the disc, the original screws are sufficient.